Hi folks,
 
How do you know how full the DPF is?
 
Im looking at some Astra-H's, so just wanted to know how I can tell how full the DPF is?
 
Regards,
G.

Hey guys,

On a 20111 Elite model, I want the following to happen, how do I do this?

- When I unlock the car, I only want the drivers door to open first, then on second click I want the rest of the doors to unlock.
- When I press the Auto button for the Climate Control, how can I stop the Air-Con automatically coming on?
- Bluetooth - does my car have bluetooth, if so, how do i get this working and/or activated?

Many thanks,

Expect loads more questions coming on here, so thanks in a

[Image: http://i179.photobucket.com/albums/w301/...5fce57.jpg]



[align=center]I decided to make this how-to in case someone wants to change steering wheel badge or replace it with a new one if damaged. You don't have to buy a new airbag, you just need to replace the front plastic cover. Swapped covers a month ago and it is a pretty easy job. The hardest part is to source the plastic cover.

Ok, first remove airbag. For removing airbag see here: [url=https://www.vxoc.org.uk/foru

Hello,
I made t20 led using 12v g4 led. The g4 led is used for home lighting. G4 led is 12v and 2 watts. I will try to explain how I do it.

[Image: http://i.hizliresim.com/77ZO9Y.jpg]

I soldered 2 pieces of copper wire to + side. I soldered 1 pieces of copper wire to eksi side. 

[Image: http://i.hizliresim.com/l31LkE.jpg]

Then I used the piece of the old t20 LEDs. I connected the positive cables in parallel and there was no error in the car.

[img]http://i.hizliresim.com/VPYAl

Hi I'm after some advice to how I go a out wiring a sub and amp to my new car in getting.... as much help would be amazing along with simple Instructions as I'm a bit of an amateur but I think it's so getting I could do with your help xx

What you will need,
I used dental floss but string will do and a bowl of warm soapy water

[Image: https://uploads.tapatalk-cdn.com/2017050...a92897.jpg]
First get a length of floss and put under the badge and work back and to

[Image: https://uploads.tapatalk-cdn.com/2017050...989202.jpg]
It should come off quite nicely and reveal the foamy sticker that held it on
[IMG]https://uploads.tapatalk-cdn.com/20170501/417580a8c483f1e2a8cb780f923d257

Hi All, does anyone know how to remove the rear  DIFFUSER TRIM its the black rubber bit at the bottom of the rear bumper on the astra j without taking off the rear bumper ,,,,,,

hello, everyone.

I need to know how to add a front center speaker in my Astra j, I have the S160 installed in my car.

thankyou...

Righty then, i think tucpal has made a how to for the normal styling packs that you get and the rear for my 2016 gtc LE with vxr pack 1 went on perfectly but needed to take the wheels off. For the front i used a T20 torx screwdriver, 4 zip ties, a pencil, sharpie, a drill with various drill bits, a grinder, pin pliers, wire snips and soapy water with sponge. As always read this guide and familiarise yourself before starting

First you want to turn the wheel so you can get access (or take it off

Hello everyone;
First of all, thank you for sharing knowledge about this car. Here I will explain how to connect the original Navi 600 microphone to
the Android radio car
1º Found the original micro.

[Image: https://preview.ibb.co/dYLgQb/micro1.jpg]

2º. Check the micro color cables:
[Image: https://preview.ibb.co/eWk1rG/1.jpg]
In this case one is blue and the other is brown-black.

3º. Goes to the original bt jack under the radio.
[img]https://image.ibb.co/n7oRQb/modulo2.jpg[/i