Switch to desktop version  
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Tags
Author: badger64 - Replies: 2 - Views: 3015
tpms fault
my tpms readings are no longer reading anywhere near accurate anymore, for some reason o/s/r and n/s/f are now reading under by about 6 psi, also this week on 2 mornings (cold) the dash warning light was on. i have set fronts at 37 psi and rears to 31 psi and checked them with a seperate digital gauge so no readings are correct, but dash says different, i have re-learnt the readings on display. has anyone else had this issue?
Author: Euroshopper - Replies: 1 - Views: 3496
Astra J Fault code reader suggestions
Hello

I have a Astra J 2010 1.3 CDTI model. I would like to buy a fault code reader for this car. Do anyone know what works? I have done some googling and it seems that OP-COM and Launch creader 6001 works, but I am not sure. I would prefer to use the Launch creader as it seems much easier, with an Op-com you need to connect a computer, and I am mainly an apple guy. 

Can the Creader 6001 read SVS for a glow plug failure for example?

kind regards
Euro
Author: Big Dave2 - Replies: 2 - Views: 2394
2.0 CDti auto gearbox fault
My 2013 Astra-J 2.0 CDTi auto is starting to play up when taken on a journey of more than 10 miles. Driving around locally it’s fine, but putting it into D after approx 10 miles or more, it snatches into gear quite violently like the clutch has gone in a manual box. If I turn the engine off and start it up again, then it’s fine for a little while. No error codes (using Op-Com).

It's done approx. 65,000 miles. Am I right in assuming it's the AF40 autobox?

The gearbox oil has never been changed,