Tags
Author:
JohnL - Replies:
11 - Views: 14936
Spare 16inch space saver wheel for a J
Will get a picture but I'm basically wondering what the wheel and tool box would be worth? I've got them from my old J thinking they would fit the VXR but I can't get the space saver over the rear brakes never mind the fronts.
So looking at what the complete setup or just the wheel on it's own would be worth.
Thanks
John
Author:
J1ODYA - Replies:
15 - Views: 12988
16" Astra J space saver
Got my unused wheel for sale, 5x115 for £75 collected.
Courier extra if needed.
On ebay
261460311963
Author:
AndyKay - Replies:
2 - Views: 3569
The dreaded Space Saver
Every time I buy a new car, the first thing I do with it is to check what sort of spare it has - if it's a space saver I buy a full size spare to match the other alloys. I now have a cellar full of brand new space savers, and I have never had a puncture!
My current Astra Tourer SE, purchased nearly a year ago has been the only exception. As I've been puncture free since the 1970s when I had my first Vauxhall (Droop Snoot (Magnum) Sportshatch 2.3) , I left the space saver in place. Mistake....
Author:
phil67 - Replies:
7 - Views: 5641
Looking for a Spare wheel or Space Saver
Hi Everyone
Is anyone selling a reasonable price spare wheel or spacesaver for a GTC, I believe they are 5 x 115.
I an not sure how big of a wheel I can fit in, so hoping one of you can advise me?
Also I need the big plastic nut thing that holds the wheel down.
Ideally close to Rotherham or if willing to post, I have checked ebay and was quite shocked at the prices
Phil
GTC Space saver
I have recently acquired a GTC 2.0 cdti, and I'm one of those that would rather have a real wheel rather than a compressor and rubber solution! The full size wheel will not fit into the boot space and thus a space saver is required. Can anyone offer advice and comment please?
Part number, possible suppliers, what to look out for and such. I've been to the wheel spec website and have the tech specs such as pcd, centre diameter (a good site to look at by the way...)
Author:
Gary13 - Replies:
5 - Views: 4525
space saver wheel
Hi All, I am still after a space saver wheel for my 63 plate gtc ,I did purchase a new but second hand one & I thought great, but when I tried to fit it, the studs didn't line up, they was only a fraction out & didn't want to force the wheel on. I was told it came off a J GTC, so perhaps mine isn't a " J " but I didn't know there was a difference. Luckily I was able to return the wheel. I was also told that a s/saver from a Cascada will fit , any help will be appreciated, thanks
Author:
umognog - Replies:
2 - Views: 2949
Got me a new workshop space!
So this has been a long time in planning, but on Friday I finally received the keys to my new house
As part of the purchase, it actually came with the site sales office as a double garage giving me some near 50sqm on workshop space (approximately 7mx7m in size).
The bare concrete floor requires sealing and I'm considering putting down a two part epoxy flooring and wanted to ask about if anyone had a) any experience of this and b) knew of an epoxy supplier in the UK that also supply "flecked