This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Tags
Author: Cameron UK - Replies: 80 - Views: 41168
Gas bonnet strut
I was doing some research on these, rusty got any further??
Author: stevenh365 - Replies: 5 - Views: 5242
loose green connector by gas pedal
Hi Guys,

Cleaning car today and in the drivers foot well to left of accelorator pedal I came across a loose green connector.

Could anyone advise if this should be un-connected or has come undone or if so where it should fix to?

I have a Astra J 2013 Sports Tourer 1.7 Diesel 130 bhp (A17DTS)


I have a pic link below if anyone could take the time to look ...  The bottom left of pic is the gas pedal and is of the right hand side of drivers foot well  (right hand drive) the cable is co
Author: bagnallman - Replies: 4 - Views: 8979
Exhaust Gas Temperature Sensor P2084
Wonder if anyone can help me?
 
I have a 2013 Astra GTC with an ongoing problem where the car will drop to limp mode.
With a code reader it has shown that the problem is “P2084 - exhaust gas temperature sensor, circuit range/performance bank 1 Sensor 2”

I erase the codes, but they do not disappear from the unit completely (they still remain on the list, but cannot be read once erased) and the car will be fine for a few months before the car goes in to limp mode and I have to erase the cod
Author: everson38 - Replies: 1 - Views: 3210
Exhaust Gas Temperature too high bank 1
Hey guys

I have a 2013 Astra GTC 2.0 with 62k on the clock. The car has been overheating as it give me the code P2428. the car has had the exhaust temp sensor replaced but still the problem still persists.

Does anyone have any ideas?

Thanks in advance.

Sent from my SM-G935F using Tapatalk

Switch to mobile version