This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Thread Rating:
  • 1 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[-]
Tags
tool scanning

Scanning tool
#1
I was thinking of buying a fault diagnosis scanning tool and have seen this on eBay
[Image: 9e30fd72f66fd91ff3430a19e42bd9b3.jpg]
But in the description it says for Vauxhall’s up to 2010, so does that mean it’s no good for later cars?
[Image: 0dfc279a204e09e3ea66f8b4a528772a.jpg]
If it’s no good, what do you guys recommend?


Sent from my iPhone using Tapatalk
Reply
#2
I would only recommend this one

http://www.op-com.co.uk/store/c1/Featured_Products.html

The one's from ebay use fair cheaper components.
[Image: Rusty-2_zpsuzrvgsp6.GIF]
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#3
Cheers mate, think I’ll get one


Sent from my iPhone using Tapatalk
Reply
#4
I’ve just ordered this op-com scan tool and have seen a few videos on YouTube where they can change the menu function on the up level display, is this possible with this or is there additional software?


Sent from my iPhone using Tapatalk
Reply
#5
You can't change from up-level to multi-line I've tried.

I even brought the tool "claimed to be used" in the video and it doesn't do it, I tried with many different sets of clocks even tried as different model still wouldn't do.

With the op-com/vaux-com all you can do is add extra menus.
[Image: Rusty-2_zpsuzrvgsp6.GIF]
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#6
I admit it would have been good if it did but it’s not essential


Sent from my iPhone using Tapatalk
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Switch to mobile version