Switch to desktop version  
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tags
drive shaft

Drive Shaft
#1
So after both deer insertents I have its been found I have a bent OSF drive shaft.

Vauxhall want over £600 for a new one. So been looking on ebay for one but unsure which would be suitable for my Astra J 2010 1.3 CDTi - A13DTE

REMOVED FROM A 2010 5 DOOR VAUXHALL ASTRA J MK6 SRI 1.6 PETROL SRI HATCHBACK - PN: 13250861

Removed From a 2013 vauxhall astra 1.4 manual ONLY 14000 miles

Removed From VAUXHALL ASTRA J MK6 09- 1.4 PN 13250861
Reply
#2
Just checked EPC and the part numbers for your car are 13335161 RH 13335160 LH. EPC seems to show the druvshafts have different part numbers for each engine size
[SIGPIC][/SIGPIC]
Reply
#3
ah thanks baz mate, you know my reg off hand do you mate lol...

them numbers for the front?

so i need 13335160
Reply
#4
Can't remember your reg. Looking at EPC the driveshaft comes complete with CV joints. It appears it's the cv joints that are different so actual shaft might be the same but 100% sure. 13335160 is N/S
[SIGPIC][/SIGPIC]
Reply
#5
you will need the correct one there are many different types
i had to do my drive shaft last year
http://www.vxoc.org.uk/forum/Thread-CV-J...RIVE-SHAFT

look for a used one as you well know they cost the earth new
Reply
#6
Baz do you want me to text you my reg?

Yeah its mad paul how much they are


Sent from my iPhone using Tapatalk
Reply
#7
If you want then I can double check numbers
[SIGPIC][/SIGPIC]
Reply
#8
Ok mate sent you a text its OSF i need..


Sent from my iPhone using Tapatalk
Reply
#9
i payed £50 from the breakers yard taken from a 13 plate car
Reply
#10
part number for my one is 13335161 :( none on ebay

i found this one but part number is 13335141 unsure if it would fit

http://www.ebay.co.uk/itm/201253758815?r...26_rdc%3D1
Reply
#11
So what is difference :-/ Tucpal would this work?
http://pages.ebay.com/link/?nav=item.vie...1504952674


Sent from my iPhone using Tapatalk
Reply
#12
EPC list that shaft for the A14XEL, A14XER and A16XER. Think the difference could be due to the transmission final drive assembly
[SIGPIC][/SIGPIC]
Reply
#13
sorry mate you will need the correct one
and good work baz
Reply
#14
Thanks for checking that for me baz :-)


Sent from my iPhone using Tapatalk
Reply
#15
just need to find one braking mate about £70-£100 is the going rate
Reply
#16
Yeah just finding one


Sent from my iPhone using Tapatalk
Reply
#17
there are a few braking on ebay worth asking them

http://www.ebay.co.uk/itm/2012-VAUXHALL-...259e8eda3e

http://www.ebay.co.uk/itm/VAUXHALL-ASTRA...5d40269ed6
Reply
#18
Paul your a star, thank you mate managed to get one from one of them

£110 with posted and it looks brand spanking new :P

once i get it will go vauxhall and they can fit it

http://www.ebay.co.uk/itm/311272722659?_...EBIDX%3AIT
Reply
#19
Why pay Vauxhall overprice labour charges? Go to a small local garage and pay less.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#20
Well done mate agree with Rusty go to a independent garage. Try Rob Aves at Grease Monkeys garage on Techno Industrial Estate look on Facebook he has a Facebook page
[SIGPIC][/SIGPIC]
Reply
#21
Thanks mate, ive messaged them on facebook


Sent from my iPhone using Tapatalk
Reply
#22
90+ vat is thay good?


Sent from my iPhone using Tapatalk
Reply
#23
Now phone VX and ask them to price to change it.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#24
Lol

Sent from my iPhone using Tapatalk
Reply
#25
no dont it would be in the £1000,s

glad i could help
Reply
#26
Guys i got my drive shaft today but i think he may have sent me wrong one.



Should i make no notice of these numbers?


Sent from my iPhone using Tapatalk
Reply
#27
that is the correct alfa code AAD5 driver side the long one
and AAD4 passenger side the short one

what one did you ask for ?? and want
Reply
#28
Osf. Which is drivers side but i think vauxhall have got it wrong wrote it wrong. It sounds like the passenger side NS is the one knocking...
I might get the passenger one too


Sent from my iPhone using Tapatalk
Reply
#29
No just get that one done and see what happens
remember they join the gear box on the passenger side at the gear box
so the sound may sound like it coming from there
but it most likely will be this one on the drivers side
Reply
#30
Ok mate thanks :-)


Sent from my iPhone using Tapatalk
Reply
#31
Here's some info for you mate

http://www.partsbase.org/parts/ope-374686/
[SIGPIC][/SIGPIC]
Reply
#32
Well turns out the drive shaft i brought from ebay, is faulty. When it was fitted was making a clicking sound. So i will be getting my money back. Thought **** it, brought a new one.


Sent from my iPhone using Tapatalk
Reply
#33
not good news
Reply
#34
No sorted it all out getting refund after they get the part back


Sent from my iPhone using Tapatalk
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CV JOINT DRIVE SHAFT tucpal 17 15,361 29:th-Jun-2014, 00:15:36
Last Post: tucpal

Forum Jump:


Users browsing this thread: 4 Guest(s)