Switch to desktop version  
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x

VXOC Astra-J/GTC › Astra-J/GTC Section › Astra-J/GTC
Not seen this before

VXOC Astra-J/GTC › Astra-J/GTC Section › Astra-J/GTC
Not seen this before

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tags
before this not seen

Linear Mode
Not seen this before
Rusty2009
Administrator
Trade Count: (4)
Posts: 8,949
Threads: 359
Thanks Received: 7 in 7 posts
Thanks Given: 1
Joined: 31 Mar 2015
Reputation: 72
Car: Astra-J 2.0CDTI S/S 165ps
Location: Bournemouth, Dorset
Sex: Male
Total Feedback: 0
#8
29:th-Jun-2014, 09:11:07
Cameron UK Wrote:can you post a link to that site that gives you all the spec of your car and details of when it was made and what options were chosen

No I can't I get all the info when I plug the MDI on mate, or you can get it from EPC your's is a MY12

Just looking on TIS and found this

Quote:All three rear seat belt switches are 2-wire switch wired to the inflatable restraint sensing and diagnostic module (SDM) using a signal circuit and a low reference circuit. When the seat belt is unbuckled the switch is closed, and when the seat belt is buckled the switch is open. The SDM sends the status of the rear seat belt via serial data to the driver information centre. After receiving the message, the driver information centre controls the illumination of the driver seat belt indicator.

I've got all the info to see whats fitted in the car.

There is an RPO code

UH5 = INDICATOR - SEAT BELT WARNING, REAR SEAT
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
My progress thread
I can do programming and retrofits using genuine GM MDI and Dealer software.
My trader section
www.vxocelectrabizz.co.uk
Website Add Feedback
Reply


Messages In This Thread
Not seen this before - by Cameron UK - 28:th-Jun-2014, 21:15:48
Not seen this before - by JohnL - 28:th-Jun-2014, 22:58:30
Not seen this before - by Cameron UK - 28:th-Jun-2014, 23:06:44
Not seen this before - by Rusty2009 - 28:th-Jun-2014, 23:26:35
Not seen this before - by JohnL - 29:th-Jun-2014, 00:24:24
Not seen this before - by Rusty2009 - 29:th-Jun-2014, 08:16:54
Not seen this before - by Cameron UK - 29:th-Jun-2014, 08:59:14
Not seen this before - by Rusty2009 - 29:th-Jun-2014, 09:11:07
Not seen this before - by cornishtaz - 29:th-Jun-2014, 09:37:44
Not seen this before - by Rusty2009 - 29:th-Jun-2014, 09:46:37
Not seen this before - by Rusty2009 - 29:th-Jun-2014, 10:21:49
Not seen this before - by Cameron UK - 29:th-Jun-2014, 11:21:45
Not seen this before - by Rusty2009 - 29:th-Jun-2014, 12:11:06
Not seen this before - by JohnL - 29:th-Jun-2014, 12:24:44
Not seen this before - by tucpal - 29:th-Jun-2014, 13:09:41
Not seen this before - by Rusty2009 - 29:th-Jun-2014, 17:01:15
Not seen this before - by Gatch - 29:th-Jun-2014, 17:04:51

Forum Jump:


Users browsing this thread: 1 Guest(s)