VXR interior upgrade

[vocky]

while your waiting get them sensors fitted.

this mornings job was to make a start on getting them fitted ...

I removed the battery and battery tray to gain access to the 'Body to Headlight' loom plugs.

Then I checked to confirm the wiring is in place from the rear parking module to those plugs and it was

So I added the correct pins to the front parking sensor loom I purchased, it's from an Insignia so the wiring colours are different to the astra J but thats not an issue.



Then I simply added the pins to the headlight loom plug



I then used a couple of cable ties to fasten the new loom along the existing headlight loom, to the side of the headlight

Next job is to whip the front bumper off, fit the parking sensors and swap over the two plug parking module to a three plug parking module. Thats a job for another day lol