![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
27:th-Jan-2019, 11:59:49
Trying to find it but no luck. Seen elsewhere it should be between 2-300bar. ALso not sure on the injector codes now as looking through at the injector replacement guide on there it says about entering a seven digit code found on top of injectors, now looking back on pictures the codes on top of denso injectors are on two rows. The code on top of one injector read As below
ECO600
FF130A
1A2E37
3765
The recon injector has been supplied with a Denso serial no consisting of 8 digits 09M18681 & underneath that with a new code
00C8BAC9C1D3CEBCCCC18B.
So does anyone know wether It has to be the complete 22 digit number or wether it is the first/last seven digits ? As on the note with the serial number and new injector code, it says new code must be programmed into ECU & old code must not be used.
Dan
ECO600
FF130A
1A2E37
3765
The recon injector has been supplied with a Denso serial no consisting of 8 digits 09M18681 & underneath that with a new code
00C8BAC9C1D3CEBCCCC18B.
So does anyone know wether It has to be the complete 22 digit number or wether it is the first/last seven digits ? As on the note with the serial number and new injector code, it says new code must be programmed into ECU & old code must not be used.
Dan