Switch to desktop version  
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x

VXOC Astra-J/GTC › Astra-J/GTC Section › Astra-J/GTC Technical › Electrical
INJECTOR CODING

VXOC Astra-J/GTC › Astra-J/GTC Section › Astra-J/GTC Technical › Electrical
INJECTOR CODING

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tags
coding injector

Linear Mode
INJECTOR CODING
NicolasPOS
Junior Member
Trade Count: (0)
Posts: 9
Threads: 1
Thanks Received: 0 in 0 posts
Thanks Given: 0
Joined: 19 Dec 2018
Reputation: 0
Car: astra J 1.7CDTI
Location: Cambs
Sex: Male
Total Feedback: 0
#4
24:th-Jan-2019, 15:26:01
(24:th-Jan-2019, 09:43:00)vocky Wrote: Injectors are not coded to the ECU, however they must be standard injectors so the fuelling is correct

An injector is basically a 12v solenoid, thus it only has two wires - one positive and one negative

I had 3 of the injectors reconditioned & one was beyond repair & replaced. I have read conflicting info as to wether they need recoding or not, however thay came back with codes printed on a label for each one. I don`t get any dtc with two code readers I have used, but it is running lumpy & not burning the fuel correctly as I`m getting black soot out the exhaust. I did think for a bit that the ecu would relearn the fuelling for the injectors as it seemed to clear up and start running well for a few mins. I replaced the fuel filter & didn't spot any filings & glow plugs and of course injector washers have also been replaced.

Dan.
Add Feedback
Reply


Messages In This Thread
INJECTOR CODING - by NicolasPOS - 22:nd-Jan-2019, 12:51:45
RE: INJECTOR CODING - by Rusty2009 - 24:th-Jan-2019, 08:44:09
RE: INJECTOR CODING - by vocky - 24:th-Jan-2019, 09:43:00
RE: INJECTOR CODING - by NicolasPOS - 24:th-Jan-2019, 15:26:01
RE: INJECTOR CODING - by Rusty2009 - 24:th-Jan-2019, 17:11:24
RE: INJECTOR CODING - by NicolasPOS - 24:th-Jan-2019, 20:25:25
RE: INJECTOR CODING - by vocky - 25:th-Jan-2019, 10:16:50
RE: INJECTOR CODING - by NicolasPOS - 25:th-Jan-2019, 15:34:35
RE: INJECTOR CODING - by Rusty2009 - 25:th-Jan-2019, 20:39:53
RE: INJECTOR CODING - by NicolasPOS - 26:th-Jan-2019, 22:49:42
RE: INJECTOR CODING - by Rusty2009 - 27:th-Jan-2019, 09:09:29
RE: INJECTOR CODING - by NicolasPOS - 27:th-Jan-2019, 11:59:49
RE: INJECTOR CODING - by Rusty2009 - 20:th-Feb-2019, 11:16:15
RE: INJECTOR CODING - by NicolasPOS - 20:th-Feb-2019, 13:36:15
RE: INJECTOR CODING - by Rusty2009 - 20:th-Feb-2019, 13:39:32
RE: INJECTOR CODING - by NicolasPOS - 23:rd-Feb-2019, 13:12:18
RE: INJECTOR CODING - by NicolasPOS - 7:th-May-2019, 13:33:02
RE: INJECTOR CODING - by Rusty2009 - 20:th-May-2019, 07:20:16
RE: INJECTOR CODING - by Yavor82 - 4:th-Dec-2020, 22:53:25
RE: INJECTOR CODING - by Rusty2009 - 5:th-Dec-2020, 09:26:43

Who read this thread?
1 User(s) read this thread:
Craig_Marvin (26:th-Apr-2024, 18:03:04)

Forum Jump:


Users browsing this thread: 13 Guest(s)