18:th-Mar-2018, 21:10:24
(18:th-Mar-2018, 18:54:06)sparkyscfc74 Wrote:(18:th-Mar-2018, 16:46:44)sparkyscfc74 Wrote:(18:th-Mar-2018, 15:12:43)sparkyscfc74 Wrote:(17:th-Mar-2018, 13:26:15)sparkyscfc74 Wrote: I'm going to plug it in later, I have seen a re-learn clutch position but haven't clicked on it.
I’ve just plugged my op com in and tested the engine measuring blocks for the clutch and brake pedal, both read fine from 0% to 100%. The learn clutch position in the programming does nothing, there were no DTC’s present so I’m still baffled as to why the cruise control isn’t working?
One other thing though was after having my headlight switch out yesterday, since I’ve put it back in, the front fog light doesn’t light up on the clocks anymore but the fogs come on. I again looked for fault codes and it came up left cornering light open circuit?
Anyone got any ideas?
Sent from my iPhone using Tapatalk
I’ve disconnected the battery for an hour to see if that does anything
Sent from my iPhone using Tapatalk
Reconnected battery, made no difference whatsoever
Sent from my iPhone using Tapatalk
I give up!!! Now my number plate lights have stopped working, message on the dash!!!! They’re LED unit so again I’m completely baffled
Sent from my iPhone using Tapatalk
Just plugged my op com back in to see about the number plate lights not working and got a page of faults which I cleared but 4 would not clear
Checked the washer fuse that had blown the other day but it was fine I’m totally stuck ☹️
Sent from my iPhone using Tapatalk