24:th-Nov-2017, 11:17:58
(This post was last modified: 24:th-Nov-2017, 11:22:00 by sparkyscfc74.)
(24:th-Nov-2017, 11:05:55)rlievens Wrote:sparkyscfc74 Wrote:I've decided that my first mod after Christmas is an M Tech short shifter. I've found that It's cheaper to by them from the UK supplier direct than Ebay even though it's the same people??
http://shop.wgmotorworks.co.uk/index.php...uct_id=338
I find them rather expensive but you can't find any other ones than the M tech's.
Was also looking into this but decided against it. The shifting with this M32 gearbox is not great and sometimes a bit hard in the lower gears. I figured installing a short shifter might improve precision but would also make the gear shifts even harder.
On the other hand I found a guy that made his own by drilling and threading a new hole in the shifter thingy closer to the pivot point thus making the shifting shorter. Was about to try this but didn't yet because of above reasons.
Yeah they are a bit expensive but I find the long throw annoying. I couldn’t find any other make either.
Sent from my iPhone using Tapatalk
(24:th-Nov-2017, 11:14:20)umognog Wrote: I removed all seats from my vectra C to deep clean them and the upholstery was a rather simple process, however the refit was a little bit looser than original.
Wonder if it's possible to work this with the factory switches....
||Sent based on the twin scientific principles of star maths and wishy thinking.||
That was my worry I’d be more gutted if the trim was a bit loose than being happy about having the heated seats!!! I’m pretty sure that someone on here would know if you could use original switches providing you had the block connectors on the switches and a wiring diagram
Sent from my iPhone using Tapatalk