18:th-Oct-2017, 20:28:09
Today was both a happy and a sad day: the postman arrived with goodies.
0805, 1206, 4040, PLCC2, PLCC4 and so on. I'm sure many of you understand this already.
Basically, about 200 tiny LED SMD components arrived. Why 200?
Simply put, this is a blue & green mix and whilst I have some idea how I want this to work, I cannot say I have all the right placements. Rather than faffing around I bought enough of everything for everything.
I would LOVE to start of with something simple: a door switch for example. However, this weekend is one of very few I am going to have the sweet sweet time to remove the instrument panel, do the change and put it back before the wife 1) notices 2) complains 3) tries to drive the car with no speedometer and no sense of speed.
So this weekend, it is coming out and it's in at the deep end.
Anyone recommend a particular iron tip? I usually use a flat edge, but these things are TINY.
Sent from my SM-G935F using Tapatalk
0805, 1206, 4040, PLCC2, PLCC4 and so on. I'm sure many of you understand this already.
Basically, about 200 tiny LED SMD components arrived. Why 200?
Simply put, this is a blue & green mix and whilst I have some idea how I want this to work, I cannot say I have all the right placements. Rather than faffing around I bought enough of everything for everything.
I would LOVE to start of with something simple: a door switch for example. However, this weekend is one of very few I am going to have the sweet sweet time to remove the instrument panel, do the change and put it back before the wife 1) notices 2) complains 3) tries to drive the car with no speedometer and no sense of speed.
So this weekend, it is coming out and it's in at the deep end.
Anyone recommend a particular iron tip? I usually use a flat edge, but these things are TINY.
Sent from my SM-G935F using Tapatalk