ok i did a bit of a test tonight and i know this is not exact and it will go in next week to be done properly
but i measured the distance up about 28inch and the distances apart
and the head lights are way out on position 0
and this is back at 25ft way up in the air
so i adjusted them down to more or less the wright height
and they look much better now
i did sort of rattle the inside of the head lights when i changed the bulbs as they seemed a bit loose
this must have knocked it out of position or something
i have been driving around for ages with it set to position 3 to stop dazzling traffic
i forgot all about it until yesterday when i was cleaning the car and noticed it was on position 3
i will get it done properly next week but that should stop the dazzling for now
but i measured the distance up about 28inch and the distances apart
and the head lights are way out on position 0
and this is back at 25ft way up in the air
so i adjusted them down to more or less the wright height
and they look much better now
i did sort of rattle the inside of the head lights when i changed the bulbs as they seemed a bit loose
this must have knocked it out of position or something
i have been driving around for ages with it set to position 3 to stop dazzling traffic
i forgot all about it until yesterday when i was cleaning the car and noticed it was on position 3
i will get it done properly next week but that should stop the dazzling for now