![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
What do you need exactly?
There are 4 wires to connects as I know. Ground, constant 12V, wire for lights and wire for interior light. He says interior wire lights should be one which is triggered when car ia unlocked goes to 0V and when interior lights goes to (7-12v depending on car). It's called pwm.
I would done it on vectra but don't have access to tis to see which wire is which. No cutting is involved since it comes with t-taps or scotch locks. As I remember about pwm best way to see is front map lights. There should be 3-4 wires. 12v, gnd and pwm wire which is 7-12v when lights are off and when triggered wire should go 0v and is somekind of ground for lights entery system.
Module is triggered with interor lights when unlocking car or opening doors or removing key from ignition in some cars. Then lights go on and when interior lights go off then starts module timer for follow melights. Time is pre defined (5, 15 or 30 seconds).
I saw module and it's quite small (50×35cm). I can ask him to send picture of module. Few versions should be also availabe soon as I wrote before but have no exact eta.
Need new disk with 32-bit system...
This is his car with fogs
https://youtu.be/5mJjXLmDRp4
There are 4 wires to connects as I know. Ground, constant 12V, wire for lights and wire for interior light. He says interior wire lights should be one which is triggered when car ia unlocked goes to 0V and when interior lights goes to (7-12v depending on car). It's called pwm.
I would done it on vectra but don't have access to tis to see which wire is which. No cutting is involved since it comes with t-taps or scotch locks. As I remember about pwm best way to see is front map lights. There should be 3-4 wires. 12v, gnd and pwm wire which is 7-12v when lights are off and when triggered wire should go 0v and is somekind of ground for lights entery system.
Module is triggered with interor lights when unlocking car or opening doors or removing key from ignition in some cars. Then lights go on and when interior lights go off then starts module timer for follow melights. Time is pre defined (5, 15 or 30 seconds).
I saw module and it's quite small (50×35cm). I can ask him to send picture of module. Few versions should be also availabe soon as I wrote before but have no exact eta.
Need new disk with 32-bit system...
This is his car with fogs
https://youtu.be/5mJjXLmDRp4