15:th-Feb-2016, 19:29:55
(15:th-Feb-2016, 12:21:04)sheppy1 Wrote: Oh so you've done the rear ones too?! I would do that but would rather have a fresh wire for the rear ones... I'll probably go via the roof lining and down the centre pillar into the hollow floor and then up through that hole as you've doneso again.. How does it work with the seat going back and forth... You're either gonna have to have loads of slack wire or something else... Not sure how you've done it
Sent from my XT1092 using Tapatalk
Mate you can just tuck the wires in through the centre console (it's what I've done, everything is pushed underneath and the wires tuck under the plastic side boards of the centre console. It's quite easy to do
@Tonto there's green for you mate