10:th-Jan-2016, 21:53:50
Got everything fitted today, drilled the cap covers and just mounted the ballasts with cable ties for the moment until I find a good place to mount them. If anyone is thinking about upgrading to HID's in their GTC and use lush lightings 9012 kit you will want to drill a 30mm hole in the dust caps for the headlights. I used a 32mm and the grommets still fit but I would have preferred they were a little bit more snug.
everything built back up inside:
I then decided to play a game of find the screw after I dropped one in when I first started hense why I just took the O/S light out.
But when I removed one of the headlight bolts i dropped that down into the cold air feed which I was delighted about.
Said screw
Anyway... I got everything done and here we are 8k HIDS
Glad they are finished and got it all back together, but then again when I was putting the airfilter box back on I dropped another screw which landed on the under tray. By this point I was soaking wet, gave it the finger and went inside to warm up
everything built back up inside:
I then decided to play a game of find the screw after I dropped one in when I first started hense why I just took the O/S light out.
But when I removed one of the headlight bolts i dropped that down into the cold air feed which I was delighted about.
Said screw
Anyway... I got everything done and here we are 8k HIDS
Glad they are finished and got it all back together, but then again when I was putting the airfilter box back on I dropped another screw which landed on the under tray. By this point I was soaking wet, gave it the finger and went inside to warm up