Scuff Plates

[sheppy1]

Hi all,

Does anyone have any photos of the stuff plates on their door sills? Seems to be two different types that I can see and want to see them on a car so I can decide which are the ones I want

Ta

Sent from my A0001 using Tapatalk

[sheppy1]

I went for these anyway:

http://www.ebay.co.uk/itm/400389302127

Which I believe are these ones from VX:

http://www.vauxhall-accessories.com/astr...ill-plates

[Tonto]

Sorry it's dark but these are mine.


Sent from my iPhone using Tapatalk

[sheppy1]

Ahhh sweet! I like that a lot! That's the one I've gone for too thanks for the photo

Sent from my A0001 using Tapatalk

[bhalay207]

I was looking at those. £12 isn't a bad price. They look smaller than what I thought though

Sent from my LG G4 using Tapatalk

[sheppy1]

Ha yeah same here! I thought they would cover the width of the sill and then be longer too but oh well

Sent from my A0001 using Tapatalk

[Nickmagicfingers1981]

Could do the same as me and buy some clear vinyl wrap.





Sent from my LG-D855 using Tapatalk

[sheppy1]

Damn fine idea! But I do like the look of the kick plates from an aesthetic point of view

Sent from my A0001 using Tapatalk

[CRNeo]

Are they not standard?

I was thinking of getting some of the clear vinyl wrap to go on the black plastic bit tbh to stop scratching that as my son likes to step out of the car on it.

[Nickmagicfingers1981]

Are they not standard?

I was thinking of getting some of the clear vinyl wrap to go on the black plastic bit tbh to stop scratching that as my son likes to step out of the car on it.

That's the same reason why i went down the clear wrap route, wanted something to protect the paint but not spending alot. all in its cost about £10 to do all the doors and the rear bumper .

Sent from my LG-D855 using Tapatalk

[tucpal]

It still will work good idea

[Rusty2009]

Are they not standard?

I was thinking of getting some of the clear vinyl wrap to go on the black plastic bit tbh to stop scratching that as my son likes to step out of the car on it.

That's the same reason why i went down the clear wrap route, wanted something to protect the paint but not spending alot. all in its cost about £10 to do all the doors and the rear bumper .

Sent from my LG-D855 using Tapatalk

What clear wrap would you suggest? do you have a link at all would love to do this to mine.

[tucpal]

There is clear scuff scratch resistant vinyl on ebay etc you can also use it as a stone guard for the front bumper wheel arches etc

[Tonto]

Hmm that's an idea as my white front bumper takes a hammering!


Sent from my iPhone using Tapatalk

[Nickmagicfingers1981]

The is the stuff that i got off ebay. Item number 261841483138.

Just make sure to get a squeegee, it will make life eaiser for you. To get it round the curves i borrowed the wife hair dryer instead of using a heat gun.


Sent from my LG-D855 using Tapatalk

[Rusty2009]

The is the stuff that i got off ebay. Item number 261841483138.

Just make sure to get a squeegee, it will make life eaiser for you. To get it round the curves i borrowed the wife hair dryer instead of using a heat gun.


Sent from my LG-D855 using Tapatalk

Cool thanks that's the stuff I found last night, I will order some next week.

What about this for the squeegee? http://www.ebay.co.uk/itm/3M-Pro-Felt-Ed...Sw-jhUBJo4

Would a couple of magnets be a good idea as well to hold it in place?
http://www.ebay.co.uk/itm/2x-Gripper-Mag...uTOWsQuwLw

[Nickmagicfingers1981]

The squeegee i used didn't have the felt on it. The wrap it's self has somthing like a protective fitting layer so once it is on you just peel of the top layer and Bob's your uncle. As for the magnets the biggest it i have done is around the bumper by the boot and just made syre it was nice and soapy and the wife gave me a hand. But if your on your own they wouldn't be a bad idea.

Sent from my LG-D855 using Tapatalk

[Rusty2009]

Cool I'll get the wife to me we practice on her FORD first lol

[Rusty2009]

@Nickmagicfingers1981 would one bit be enough to do all the door sills & bumper?

[Nickmagicfingers1981]

I bought the 1520x300 and did all the doors and the top of the boot bumper. I did the boot first due to the curve on it, the wrap is good as you can use a biro to mark it out as you are going to pull both layers off.

Sent from my LG-D855 using Tapatalk

[Rusty2009]

Cool thanks mate, I will order some Tomorrow.