Trade Count:
(
0)
Posts: 3
Threads: 1
Thanks Received:
0 in 0 posts
Thanks Given: 0
Joined: 17 Jul 2020
Reputation:
0
Car: Buick ENcore
Location: Lithuania
Sex: Undisclosed
Total Feedback: 0
20:th-Jul-2020, 23:37:44
(This post was last modified: 21:st-Jul-2020, 18:59:15 by Rusty2009.)
Hello everybody,
I installed the navi 950 in the Buick encore, reprogrammed the EEPROM with the Buick encore VIN and everything went great (head unit works fine). After leaving the car locked for a while and turning on the head unit again, there is no sound at all even turning signals or open door sounds dissapear.
Can anyone help to solve this problem?
Trade Count:
(
0)
Posts: 3
Threads: 1
Thanks Received:
0 in 0 posts
Thanks Given: 0
Joined: 17 Jul 2020
Reputation:
0
Car: Buick ENcore
Location: Lithuania
Sex: Undisclosed
Total Feedback: 0
21:st-Jul-2020, 09:44:14
(This post was last modified: 21:st-Jul-2020, 18:59:40 by Rusty2009.)
Which pin on navi 950 turns on the factory amplifier?
And how to enable if not activated?
Trade Count:
(
0)
Posts: 3
Threads: 1
Thanks Received:
0 in 0 posts
Thanks Given: 0
Joined: 17 Jul 2020
Reputation:
0
Car: Buick ENcore
Location: Lithuania
Sex: Undisclosed
Total Feedback: 0
21:st-Jul-2020, 11:05:00
(This post was last modified: 21:st-Jul-2020, 19:00:31 by Rusty2009.)
I found a temporary solution, pulled out pin37 (amplifier control) from connector A11 X2 and the sound came on.The question remains how to invert the amplifier control signal in navi950?(Now is when the head unit is on pin37 5v, when off 0v.)
Trade Count:
(
4)
Posts: 8,940
Threads: 359
Thanks Received:
4 in 4 posts
Thanks Given: 1
Joined: 31 Mar 2015
Reputation:
69
Car: Astra-J 2.0CDTI S/S 165ps
Location: Bournemouth, Dorset
Sex: Male
Total Feedback: 0
The radio needs to be programmed properly so it knows it has UQA.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
![[Image: Rusty-2_zpsuzrvgsp6.GIF]](https://www.vxoc.org.uk/Images/rusty/post%20images/Rusty-2_zpsuzrvgsp6.GIF)