hello from Wolverhampton

[Rughead]

Hi, my first post. As an owner of a "regular red" GTC cdti 2.0 with 19" upgrade alloys and standard everything else I wondered what could be done to improve/ look after my new metal baby.

[tucpal]

welcome lots of ideas on here for you

[Rusty2009]

Welcome. There's alot you could do depends what it is you want to do.

[Rughead]

Thanks for the warm welcome. I'd love to do a HID conversation, but I'm worried about wearing the bulbs out when flashing when headlights off as the bulbs need a warm up. Of course I should retro fit the AFL's to be legal.

[Rusty2009]

There are hid kids out there for this that do also do high beam.

[Rughead]

There are hid kids out there for this that do also do high beam.

Would they have to have quick ballasts so when no lights on and I flash to let somebody past it fires up in time and does not burn out the bulbs?

[Rusty2009]

I'm not too sure mate I will find a set tomorrow and post a link I've never used HID kits myself.


Sent from my iPhone using Tapatalk

[tucpal]

check the how to on HIDS BAZ did on his GTC in the how to section
and the Projector HID retro fit i did for the 5 door there is a bit of info on a good HID kit in there.

http://www.vxoc.org.uk/forum/Thread-GTC-HID-How-to

http://www.vxoc.org.uk/forum/Thread-Proj...a-j-5-door

TERMINATOR SLIM KIT from HIDS DIRECT i am using and is really good.

[Rusty2009]

here you are mate, Take note this is not a 9006 kit but they do do the 9006 kit

http://www.ebay.co.uk/itm/Top-Quality-12...20f2bfc824

[tucpal]

No that's a 55watt kit and will not be error free get the terminator slim kit from HIDS direct 35 watt

[Rusty2009]

No that's a 55watt kit and will not be error free get the terminator slim kit from HIDS direct 35 watt

There you go Tucpal I just linked this to show what I mean about the KIT that is made for main beam and high beam.