23:rd-Jul-2018, 07:47:35
(22:nd-Jul-2018, 21:47:38)James3866 Wrote: Hi all. I am looking at wiring a tow bar relay up to an after market towbar. I know it needs a relay so as not to mess with the canbus. My question is I have noticed that fuse position 5 in the rear fuse box has a pin sticking out of it. I cannot find any listing for fuse 5 on any diagrams. I noticed on another thread on this site that a user hooked up to fuse 5 for heir trailer relay power source. Can anyone tell me if this will cause any issue to the cars computer by doing this. The other thread used a female spade connector to bridge onto the pin. Thanks. James
That would of been my car with the tow-bar wiring.
There was no relay used in the system & there was no issues with the canbus at all.
Fuse on 5 as far as I've been able to find is not used for anything at all.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.