Inner Wing Lining removal help needed

[ed-b]

Hi All

I have a 2016 Astra J GTC. I need to remove the inner wing liners (front and rear). I have checked the site and can't find a reference to this request. Can anyone point me in the right direction please. Also, does anyone know if there is a GM workshop manual for this vehicle ? JCT600 have access to a parts catalogue and I was having a look at our local branch yesterday. It shows a breakdown of each part of the vehicle. Trouble is, I'm told that it's only available to dealerships. Does anyone know if it is possible to access this type of material from an alternative source ?

[Rusty2009]

Welcome.

I'm guessing you mean the wheel arch liners?

Yes there is a workshop manual http://workshop-manuals.com/vauxhall/ast...itle_page/

There is also EPC (although somewhat out of date now)
There is also Global TIS V32b (offline which quite out of date) or V36 which some users have issues with.

[ed-b]

Hi Rusty
Many thanks for your reply, that really helps. Can you advise on how I can access the EPC, TIS and V36 please ?
All the best, Ed

[Rusty2009]

Hi Ed, of course not a problem

I use a site called autoprofessionals

EPC
http://autoprofessionals.org/showthread.php?tid=1666

Global TIS
http://autoprofessionals.org/showthread.php?tid=7243

With Global TIS you'll need to ask for activation code on the forum once you've installed it.

[ed-b]

Hi Ed, of course not a problem

I use a site called autoprofessionals

EPC
http://autoprofessionals.org/showthread.php?tid=1666

Global TIS
http://autoprofessionals.org/showthread.php?tid=7243

With Global TIS you'll need to ask for activation code on the forum once you've installed it.

Hi Rusty
That's brilliant, many thanks for your help, all the best, Ed