KEY FOB - Printable Version +- VXOC Astra-J/GTC (https://vxoc.org.uk/forum) +-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5) +--- Forum: Astra-J/GTC Common Problems (https://vxoc.org.uk/forum/forumdisplay.php?fid=22) +--- Thread: KEY FOB (/showthread.php?tid=741) |
KEY FOB - tucpal - 22:nd-Jul-2014 any where i can get a set of keys new and programed info needed i am fed up with this key rattle now i need new ones as the spare is also broke rusty do you think you can program a key to the car ?? found this but don't fancy the drive for a programed one http://www.ebay.co.uk/itm/New-Vauxhall-Opel-2-Button-Remote-Key-Astra-J-Insignia-Mokka-Zafira-C-/171394298624?pt=UK_Car_Accessories_Safety_Security&hash=item27e7e57300 anyone know how much programing will be and will it be a visit too vauxhall programming and a key from them needed ?? KEY FOB - WhelanUK - 22:nd-Jul-2014 I had a second flip key from Vauxhall and apparently only they can programme it. You can get third parties that do it from what I've seen but you need specialist software. I do know you can only have three keys programmed to each car. KEY FOB - Dicko - 22:nd-Jul-2014 I know some one that can program keys but he carn't cut them he is only round the corner from me to http://www.cheshireremapping.co.uk/index.html KEY FOB - Rusty2009 - 22:nd-Jul-2014 I got my key off eBay £35 uncut then I got it cut and programmed it myself. anyone with a vauxcom or MDI can programme it mate need the car pass. KEY FOB - Rusty2009 - 22:nd-Jul-2014 I know on my veccy I programmed 5 keys I've only got 3 so far on the J. KEY FOB - tucpal - 22:nd-Jul-2014 you going to trax then thanks for the link dicko where are you from then does your mate want to offer discount tuning on here ?? KEY FOB - Dicko - 22:nd-Jul-2014 I am in Northwich my mate is in barnton Yes he probley will hes is very good KEY FOB - tucpal - 22:nd-Jul-2014 cool we could do with a mapper on here KEY FOB - Rusty2009 - 22:nd-Jul-2014 tucpal Wrote:you going to trax then I'm hoping too but not looking possible at the minute mate tucpal Wrote:cool we could do with a mapper on here +1 I'm thinking of having my DFP out and remap soon. KEY FOB - JohnL - 22:nd-Jul-2014 The rattle is annoying mine has it to. I'm tempted to strip my key down and try to fix it myself I've just not got around to making a start on it. KEY FOB - tucpal - 23:rd-Jul-2014 Thats why my other key is broke the flip key stop working so i opened the key to fix it and there is no way it goes back together i got a cheap case from ebay and the thing will not hold the blade as it is a different fitting for the blade and also when i opened the cheap case to swap the blade and circuit board over again the key would just not go together so i glued it and broke the circuit as glue got all over it and now the key case will not go together and the key fob wont work either so i messed up big time there best bet looks to just get a key with the chip and circuit in there and just get the blade cut and programed KEY FOB - Rusty2009 - 23:rd-Jul-2014 I know there not many places that can cut the blades as the cutting tool is very small I couldn't find anywhere local but gave it to my mechanic who knew someone and it only cost a beer too This is the chap who I got the key off his price has gone up though. http://www.ebay.co.uk/itm/New-Vauxhall-Opel-2-Button-Remote-Key-Astra-J-Insignia-Mokka-Zafira-C-/171394298624?pt=UK_Car_Accessories_Safety_Security&hash=item27e7e57300 KEY FOB - tucpal - 23:rd-Jul-2014 think i will just go up to him and get two cut and programmed from him KEY FOB - Dicko - 25:th-Jul-2014 Rusty2009 Wrote:I'm hoping too but not looking possible at the minute mate He can do that very soon i want mine doing to |