CV JOINT DRIVE SHAFT - Printable Version +- VXOC Astra-J/GTC (https://vxoc.org.uk/forum) +-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5) +--- Forum: Astra-J/GTC Common Problems (https://vxoc.org.uk/forum/forumdisplay.php?fid=22) +--- Thread: CV JOINT DRIVE SHAFT (/showthread.php?tid=594) |
CV JOINT DRIVE SHAFT - tucpal - 19:th-Jun-2014 So i have had a clicking coming from the front left hand side or passenger side for a few months now and today a real bad grinding noise is now coming from the front so it looks like the cv joint is collapsing now my mate is going to have a look tomorrow but he recommends i replace the whole drive shaft so i am not that happy today as this will cost me big time CV JOINT DRIVE SHAFT - Kevin - 19:th-Jun-2014 Sounds like your mate wants an easy and clean life fitting a whole shaft. Save the bucks and fit a cv joint only. CV JOINT DRIVE SHAFT - tucpal - 19:th-Jun-2014 agreed there kevin it sounds like the inside joint but the boot is not spilt it looks fine it was clicking in first and second when pulling off for a while now and clicking in reverse also but no clicking when the steering wheel is turned and i have had vibration through the key and steering area when pulling away in first for a few weeks but today on the way home a very loud metal grinding started from the passenger side i pulled over and checked the car out started it back up and it was grinding again then it just stopped and has now gone but there's a small knock now when going over bumps from the passenger side so the cars parked up and will not be used just so nothing gets any worse or i end up losing all drive i will get him to look at it next week and get it out and see what the damage is i would prefer the joint to be fixed if possible as this will be much cheaper than replacing the whole thing CV JOINT DRIVE SHAFT - tucpal - 20:th-Jun-2014 found a brand new driveshaft on ebay being sold of cheap at my local lookers vauxhall dealer £200 so that is going on the car this afternoon part number 13335140 code CG CV JOINT DRIVE SHAFT - Rusty2009 - 20:th-Jun-2014 Nice one mate good luck (hope it solves the problem) CV JOINT DRIVE SHAFT - tucpal - 20:th-Jun-2014 i am half happy and half mad at the moment grinding and knock has stoped from the passenger side but the clicking has not stopped so the other side is now suspected SO WHAT THE HELL how on earth have both sides gone at 30.000 miles new price for the drivers side is £695 with my discount i get it for £495 so i ordered a used one for £50 form a brakers. i will get it fitted mid week i am starting to get real annoyed with this car now.... CV JOINT DRIVE SHAFT - Rusty2009 - 20:th-Jun-2014 How bloody much, at least you can drive again for the moment. CV JOINT DRIVE SHAFT - tucpal - 20:th-Jun-2014 YEP for now anyway until the other side goes the other side i did was £695 notes new as well so i was lucky to find a new one that was so cheap but i will have it all sorted by the end of the week but i am Very Very Mad now with this car it is becoming more hassle than its worth.. I have a horrible feeling this is all gearbox related but i really hope i am wrong CV JOINT DRIVE SHAFT - n1ibor - 21:st-Jun-2014 i think i might go to the garage for the extra 3 years waranty for 650⬠after all the problems i see with the astra and what is a CV joint?:confused CV JOINT DRIVE SHAFT - tucpal - 22:nd-Jun-2014 if you look at the picture above it joins the wheel to the gear box the cv joint are the two bits on the end but they can get damaged by speed bumps and potholes in the road as kevin said above they can be fixed but it is getting the parts and most of the time its cheaper to get one from a scrap yard as long as it is in good condition also i noticed the knock is still there as well as the click so it looks like my mate replaced the wrong side i have had words and he is doing the other side for free and doing my next service also for free. so lets hope this time he gets it right but the down side is the car is staying parked up this week CV JOINT DRIVE SHAFT - tucpal - 25:th-Jun-2014 So now that i have calmed down a bit and the correct driver side shaft has turned up i will get that put on the car on friday and hope that sorts that out i also noticed the part number has changed so the old part for the 1.4 and 1.6 is 13250861 CH and the new part number for the 1.4 and 1.6 is 13335141 AAFT Also the new drive shaft has a metal plate on the end wheel side the old one does not have this it looks like it slots in the hole in the hub may be it holds that end in better so there has been some sort of change to the design may be this is to improve the knocks from the drivers side people have been reporting maybe ? or it may be just a dust cover for the back of the wheel bearing the older one looks like this with no plate on the end but that is the other side of the newer one just to show you the difference so ignore the threaded bit so just gotta wait now. CV JOINT DRIVE SHAFT - tucpal - 27:th-Jun-2014 ALL SORTED OUT no more clicking and no more knocking so it was the drivers side after all CV JOINT DRIVE SHAFT - Cameron UK - 27:th-Jun-2014 tucpal Wrote:ALL SORTED OUT Glad to hear that!!!! CV JOINT DRIVE SHAFT - tucpal - 27:th-Jun-2014 also something interesting i have had a bad key rattle for a few months along with the clicking when pulling off and the key rattle has now gone also :cool CV JOINT DRIVE SHAFT - Rusty2009 - 27:th-Jun-2014 Glad it's all sorted now mate are happy with your car again CV JOINT DRIVE SHAFT - tucpal - 27:th-Jun-2014 yep i mist it been in a corsa all week and god you think the j rattles and going over speed bumps my ribs still hurt CV JOINT DRIVE SHAFT - JohnL - 28:th-Jun-2014 What have you done to sort the key rattle CV JOINT DRIVE SHAFT - tucpal - 29:th-Jun-2014 i think the bad drive shaft was making vibrations come up through the steering column as when the drive shaft was done the key no longer rattles |