|
vin relearn navi 600 - Printable Version +- VXOC Astra-J/GTC (https://vxoc.org.uk/forum) +-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5) +--- Forum: Retrofit Research (https://vxoc.org.uk/forum/forumdisplay.php?fid=23) +--- Thread: vin relearn navi 600 (/showthread.php?tid=4980) |
vin relearn navi 600 - geoffp - 5:th-Jul-2021 Does anyone know how I can VIN relearn my navi 600 into my insignia 2010 vx line? Its currently got the bluetooth CD400 in it and I have grabbed a navi 600 to try and upgrade the unit. I have VX DIAG, opcom, tech 2 and the Opel development software to send XMLs to the car via VXDIAG. I cant seem to work out a solution. They didnt release the navi 600 for my year 2010 it was 2011 i think, so not sure SPS'ing a calibration would work because it wont have one for my year. Ive spent a month researching and cant figure it out. Are you aware of anything I can use. They apparently don't have an eeprom inside to read and write to, its stored in flash and the readers are expensive so not worth buying just for a 1 off. Thanks for any helping tips you might be able to share. Geoff. RE: vin relearn navi 600 - livo - 5:th-Jul-2021 you can do it by removing the 24c128 chip and reprogram the vin in a programmer. if you had been local I would have done it for you. |