Deadlock not working - Printable Version +- VXOC Astra-J/GTC (https://vxoc.org.uk/forum) +-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5) +--- Forum: Astra-J/GTC (https://vxoc.org.uk/forum/forumdisplay.php?fid=19) +--- Thread: Deadlock not working (/showthread.php?tid=4844)

Deadlock not working - Jonika21 - 18:th-Dec-2020 Hello friends. My car is not deadlocking. Already changed the drivers door lock and the relay kr97, in the rear fusebox. Any ideas ? Thank you Enviado do meu SM-G950F através do Tapatalk RE: Deadlock not working - Jonika21 - 19:th-Dec-2020 i forgot to say that it is a 3 door gtc found the problem. it can be closed. thank you RE: Deadlock not working - Rusty2009 - 20:th-Dec-2020 Was going to say on one I had it there was corroded pin on the rear fuse board causing the issue. What was the issue you found? Deadlock not working - Jonika21 - 20:th-Dec-2020 Hello rusty. The rear fuseboard was not the problem. I have changed it recently. The problem is that my car hasn't the deadlock door locks. I could sware i have done it already but i have checked the epc with my vin and my door locks don't support it. I will change them for deadlock capable ones. I assume any programing is required once in gds2 it is possible to simulate deadlock right? Thank you Enviado do meu SM-G950F através do Tapatalk RE: Deadlock not working - Rusty2009 - 22:nd-Dec-2020 GDS2 can do the testing testing yes. But any programming would need SPS. I would have to look into the calibration files to see if there is a difference & also the wiring. Deadlock not working - Jonika21 - 22:nd-Dec-2020 Ok rusty, thank you. Appreciated. I will do some research too.. Enviado do meu SM-T580 através do Tapatalk