VXOC Astra-J/GTC
Instrument cluster - Printable Version

+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Astra-J/GTC (https://vxoc.org.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Instrument cluster (/showthread.php?tid=4683)



Instrument cluster - Fadii13 - 28:th-Jun-2020

Hello everyone,
I have an Opel Astra J 2.0 cdti automatic and since I bought it (2 years ago) I’m having an issue with the instrument cluster. 
Actually it doesn’t show all the menus and never shows me messages when there’s a problem with the car, I tried to reprogram with op-com but I can’t access to it (I don’t know why) and I took it to Opel France and they told me you need to change the instrument cluster without any explanation. 

So I decide to change it and I bought a used instrument cluster with almost the same number of kilometres and the same part number (13336484) and it works great and I reprogrammed it using I’m-com and now it shows all the menus I wanted to see. 
But the issue is that it doesn’t show the mileage, it shows this ( - - - - - - ) instead of the mileage. 

Om-com is showing me there’s a problem with the immobilizer identifier. 
I searched so much to find a solution but I couldn’t find anything. 

The pic with the yellow screws is the used instrument cluster I bought and the other one is the original. 
So could you please help me ?

Cheers


RE: Instrument cluster - Jpbroad1970 - 28:th-Jun-2020

Your IPC needs programming to your car. I'm pretty sure you can't do that with opcom. It needs your vin programming into the IPC.


RE: Instrument cluster - plasma - 28:th-Jun-2020

This is quite a specialist field for reprogramming clusters, have a word with @rusty . You'll probably find you'll have to ship it over to be sorted as a lot of people do.


RE: Instrument cluster - Fadii13 - 29:th-Jun-2020

Ok thank you for your advice guys. I will contact him. I hope it’s gonna work.


RE: Instrument cluster - Rusty2009 - 29:th-Jun-2020

Yes the need de-programming from the original car and then reprogramming to your car with an MDI and SPS.

There could be an issue in that you've now played with op-com them it may have overwritten the original cars vin.

This can be checked real easy with op-com.

Either way it's possible but if the VIN has been wiped out it'll mean opening up the unit.


RE: Instrument cluster - Fadii13 - 29:th-Jun-2020

I checked the vin number on Op-com and each IPC shows me it own vin number so I think there’s no problem with that.
Is it possible that I send you my IPC so you solve the problem please ?
I live in France


RE: Instrument cluster - Rusty2009 - 30:th-Jun-2020

Yes of course I see I have a PM from you which I will reply to in a minute.