For any member wanting to change the LED colour in the window switch

Tools required
T20 torx driver
Small flat head
As required 10 x 0805 Blue LED (SMD) - Ultra Bright - UK - 1st Class Post | eBay]805 smd LED One led in both rear and passengers switches. Drivers 2 leds(front elec only) or 5 leds(front & rear elec windows)
Fine tipped soldering iron

3 door owners need to follow all steps but 5 door owners can miss out steps 1-4

Remove the black insert carefully, the ends move inwards as there' a right clip on each end


Showing the various clips on the black insert


Undo the one T20 screw holding the window switch in


Carefully raise the front edge of the switch through this hole


Once front edge is raised slide forward


Then raise the rear edge slide the switch backwards to release from behind the handle


Disconnect the Elec connector by pushing the little tab


To separate the switch from the housing unclip qty 4 clips


The 2 parts separated( at this point you could follow Cameron how-to and wrap the cover)


To gain access to the LED PCB unclip qty 6 clips


The 2 parts separated


Picture of LED to be changed(passengers side)


LED's for front drivers switch for all 4 elec windows


LED changed I've marked the power connections for testing purposes prior to rebuild


Testing after LED change(Drivers side front elec windows only)


Switch rebuilt( in reverse order)


Refitted back into car