Jacking / lifting points. - Printable Version +- VXOC Astra-J/GTC (https://vxoc.org.uk/forum) +-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5) +--- Forum: Astra-J/GTC Technical (https://vxoc.org.uk/forum/forumdisplay.php?fid=20) +--- Thread: Jacking / lifting points. (/showthread.php?tid=3702) |
Jacking / lifting points. - everson38 - 4:th-Jan-2018 Hey guys Have a 1.7 diesel 62 plate astra J. I am planning on jacking up the car over the weekend. Does anyone have any imagery regarding lifting points / also any tips or things to look out for when lifting this specific model car? As I know sometimes things don't run as smoothly as the manual says lol. Any help appreciated. Thanks again guys Sent from my SM-G900F using Tapatalk Jacking / lifting points. - Iaintruten - 5:th-Jan-2018 If using a trolley Jack I used the sub frame to Jack the car up then use 2 axle stands if working underneath, if using original Jack look underneath the cars sill at the side of the car you will see a rail with 2 indents one underneath the front door and one under the rear door will try and get a picture later today but that's only for the original scissor Jack as a trolley Jack would damage the rail. Sent from my SM-N950F using Tapatalk RE: Jacking / lifting points. - Rusty2009 - 5:th-Jan-2018 Have a look at this thread https://www.vxoc.org.uk/forum/Thread-Lifting-and-Jacking |