|
Roof wrapping gloss black - Printable Version +- VXOC Astra-J/GTC (https://vxoc.org.uk/forum) +-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5) +--- Forum: Astra-J/GTC (https://vxoc.org.uk/forum/forumdisplay.php?fid=19) +--- Thread: Roof wrapping gloss black (/showthread.php?tid=3390) |
Roof wrapping gloss black - twinpipes - 22:nd-Jun-2017 Getting the roof wrapped gloss black on a new red gtc, wonder how to remove the large shark fin aerial from the roof so to do it all together, the fin i think covers the main aerial. Is the fin stuck with 3m tape. It is the new larger fins , also found on the new insignia. RE: Roof wrapping gloss black - Rusty2009 - 23:rd-Jun-2017 I would say there is a 10mm bolt inside the car drop the headlining down at the back. RE: Roof wrapping gloss black - twinpipes - 23:rd-Jun-2017 (23:rd-Jun-2017, 07:03:45)Rusty2009 Wrote: I would say there is a 10mm bolt inside the car drop the headlining down at the back.Was sent this by a guy in parts and mine has the fin in picture 14, so i think it is just stuck with adhesive, so may be able to grt off to wrap underneath then put it on again. Roof wrapping gloss black - Nathjnz - 24:th-Jun-2017 I had mine wrapped and the guy just made a hole for the fin the fit through then cut around the excess wrap Sent from my iPhone using Tapatalk |