|
Cd400 to500 upgrade - Printable Version +- VXOC Astra-J/GTC (https://vxoc.org.uk/forum) +-- Forum: Welcome & Site news (https://vxoc.org.uk/forum/forumdisplay.php?fid=3) +--- Forum: Introduction Area (https://vxoc.org.uk/forum/forumdisplay.php?fid=14) +--- Thread: Cd400 to500 upgrade (/showthread.php?tid=3106) |
Cd400 to500 upgrade - Davy20121957 - 19:th-Feb-2017 Looking for help to fit cd500 navi to Astra j 2010 To replace cd400 I have all parts required plus lots of spare parts As I am in Edinburgh it's not easy any information would be great I also have spare cd500 from insignia but no screen Spare loom for insignia cd800 with consul controls and USB port with built in card reader A few dab units A few USB control Ecus 2 Bluetooth ecus and 2011 Merida reverse kit Would be willing to swap these for detailed info on how to fit cd500 navi RE: Cd400 to500 upgrade - Rusty2009 - 20:th-Feb-2017 First thing do have access to online SPS? A VCI will cost you €95 also. RE: Cd400 to500 upgrade - Davy20121957 - 20:th-Feb-2017 Already have global 'tis ,printed off wiring looms and I have a gm. Vxnano Still not sure we're wire go RE: Cd400 to500 upgrade - Rusty2009 - 24:th-Feb-2017 I would first say a VXNano, can cause lots of problems I've already had a chap come down from up North to put right his car after using one of them. You do know there is a €95 VCI request cost for Navi retrofit. The wiring is really quite easy you just need look at both and see the differences. RE: Cd400 to500 upgrade - Davy20121957 - 28:th-Feb-2017 Thought with 2010 model you don't need vci code Don't have sat nav wiring for Astra j so don't know what wires go were .. does it just plug in??? RE: Cd400 to500 upgrade - Rusty2009 - 1:st-Mar-2017 Yes a 2010 needs a VCI. you said you have the wiring schematics printed off so you need to look at them your soon spot the difference. RE: Cd400 to500 upgrade - Davy20121957 - 4:th-Mar-2017 Wiring looms diagrams from gm are useless to hard to make sense of them 1 diagram for all I think I will try and find one inbreakers yard and remove loom Was hoping someone might have had information on how to do it RE: Cd400 to500 upgrade - Rusty2009 - 5:th-Mar-2017 When I started my AFL retrofit I was the same couldn't make head nor tale of them but after a few days of staring at them it's so simple and easy to follow. Yes I know the wiring changes needed as does one other person but we aren't just going to give the information out so the whole world knows it we've had to learn it. I don't mind sharing info but when all I do is share and no-one is willing to share info in return you get to the point of not being willing to share info yourself. RE: Cd400 to500 upgrade - Davy20121957 - 15:th-Mar-2017 Many thanks for taking the time to reply like I said before I have some parts i don't need RE: Cd400 to500 upgrade - tzr608 - 1:st-Jul-2018 i am upgrading but am stuck as to where there wiring changes are from i.e pic (1:st-Jul-2018, 13:48:21)tzr608 Wrote: i am upgrading but am stuck as to where there wiring changes are from i.e pic |