+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Retrofit Research (https://vxoc.org.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Is it possible to add a pull out cycle carrier (/showthread.php?tid=2513)
Is it possible to add a pull out cycle carrier - mrtc - 29:th-May-2016
Is it possible to fit a pull out cycle carrier. Never seen one before not sure if its just non UK market but it would
RE: Is it possible to add a pull out cycle carrier - J1ODYA - 29:th-May-2016
I bet it's not worth the hassle, but does look cool.
Sent from my SM-G920F using Tapatalk
RE: Is it possible to add a pull out cycle carrier - Rusty2009 - 29:th-May-2016
Could very well be retro fittable, it is an option in the UK.
RE: Is it possible to add a pull out cycle carrier - sheppy1 - 29:th-May-2016
Would it not need changes to the frame of the car? I mean the rest bumper bar alone is where the Reg plate is so looks like that would need swapping/removing at the very least car frame wise
Sent from my EVA-L09 using Tapatalk
RE: Is it possible to add a pull out cycle carrier - Rusty2009 - 29:th-May-2016
Chassis would be the same no matter what.
bumper would need changing for sure but what else unless I look into it I couldn't tell you.
RE: Is it possible to add a pull out cycle carrier - mrtc - 29:th-May-2016
Best thing would be to find a front end write off and nick the rear bumper loom frame etc etc. Sounds like a huge job