Switch to desktop version  
Reverse bulb upgrade - Printable Version

+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Astra-J/GTC (https://vxoc.org.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Reverse bulb upgrade (/showthread.php?tid=1960)



Reverse bulb upgrade - snapshot11 - 1:st-Jan-2016

Hi so ive upgraded my tail lights to LED works fine tail light are not on the Canbus however the reverse bulb is and its causing an error does anyone know if there are any plug and play resistor kits for this part of the lighting system as it has a different connector and the bulb is the offset type i cannot see any. I dont want to be cutting wiring and i am using a canbus error but its not pulling enough power clearly thanks.


RE: Reverse bulb upgrade - Rusty2009 - 1:st-Jan-2016

I have LED's in mine and they aren't on the canbus.


RE: Reverse bulb upgrade - snapshot11 - 1:st-Jan-2016

(1:st-Jan-2016, 17:22:06)Rusty2009 Wrote: I have LED's in mine and they aren't on the canbus.

They are on mine unfortunately it a 2010 J SRi it comes up check reversing lamp I may just have to keep a normal bulb in then thanks for reply rusty


Reverse bulb upgrade - Rusty2009 - 1:st-Jan-2016

Only thing you could do is add a resistor on the Rev light wire which LED bulb did you use (do you have a link)?


Sent from my iPhone using Tapatalk


RE: Reverse bulb upgrade - snapshot11 - 1:st-Jan-2016

(1:st-Jan-2016, 20:41:56)Rusty2009 Wrote: Only thing you could do is add a resistor on the Rev light wire which LED bulb did you use (do you have a link)?


Sent from my iPhone using Tapatalk

http://www.ebay.co.uk/itm/141191988703?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT


RE: Reverse bulb upgrade - sheppy1 - 1:st-Jan-2016

Similar to the reg plate bulbs in mine...most don't have any issues but mine come up with an error...odd


Reverse bulb upgrade - Rusty2009 - 2:nd-Jan-2016

That's the same bulb I have.

I would suggest a resistor on the Rev light wire then


Sent from my iPhone using Tapatalk


RE: Reverse bulb upgrade - DNT - 5:th-Jan-2016

Mine come up with an error too