Switch to desktop version  
CD 400 unlock - Printable Version

+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Retrofit Research (https://vxoc.org.uk/forum/forumdisplay.php?fid=23)
+--- Thread: CD 400 unlock (/showthread.php?tid=1685)



CD 400 unlock - nidzo - 18:th-Jul-2015

Is it possible to unlock cd 400 without chassis number?
i was remove cd 300 and put cd 400 along with display.
climate controls are showing on display, but radio showing "locked"


RE: CD 400 unlock - Rusty2009 - 18:th-Jul-2015

It might well be possible but the VIN would need to be changed that is stored Eprom (if these units have an eprom chip)


RE: CD 400 unlock - tucpal - 18:th-Jul-2015

Were are u based


RE: CD 400 unlock - bhalay207 - 18:th-Jul-2015

Funnily enough me and ***** were discussing this when I had my DAB programmed. The radio doesn't have an eprom chip nor does it have a removable programme option like the clocks do (that'll probably make more sense to you @rusty2009)

He said the last time he changed a radio, he had to take a photo of the old and replacements ident and send it to opel for them to give him a vci code.

Sent from my LG G4 using Tapatalk


RE: CD 400 unlock - tucpal - 18:th-Jul-2015

Go to vxmods he knows how to do it ***** does not


RE: CD 400 unlock - bhalay207 - 18:th-Jul-2015

Ahh, fair enough Haha

Sent from my LG G4 using Tapatalk


RE: CD 400 unlock - tucpal - 18:th-Jul-2015

there is a bit more to it than just the programming
give him a bell i know he has done one already


RE: CD 400 unlock - Rusty2009 - 18:th-Jul-2015

the radio does have a removal option


RE: CD 400 unlock - bhalay207 - 18:th-Jul-2015

Looks like your all set then @nidzo


RE: CD 400 unlock - nidzo - 19:th-Jul-2015

vaux com is not giving me any programming option, only code "theft protection active"
i`m going tomorrow to dealer
sorry for bad english, i`m from croatia


RE: CD 400 unlock - Rusty2009 - 19:th-Jul-2015

Vauxcom won't it's MDI only for programming.