|
3SDM Alloys - Printable Version +- VXOC Astra-J/GTC (https://vxoc.org.uk/forum) +-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5) +--- Forum: Astra-J/GTC (https://vxoc.org.uk/forum/forumdisplay.php?fid=19) +--- Thread: 3SDM Alloys (/showthread.php?tid=1204) |
3SDM Alloys - SI SRI - 16:th-Jan-2015 I have been offered a set of 19" 3SDM Trendsetter 0.05 alloy wheels in black. Any ideas if they will fit to the J? I have seen them on VW's and Astra H but unsure what they would be like if could fit. 3SDM Alloys - Rusty2009 - 16:th-Jan-2015 Not a clue mate do you any details PCB centre bore etc? This thread will give you the details for the J engine deepening http://www.vxoc.org.uk/forum/Thread-Wheels-and-tyres Sent from my iPhone using Tapatalk 3SDM Alloys - tucpal - 16:th-Jan-2015 if they were on a astra H i would say know as rusty says PCD is needed you are 5 *115 3SDM Alloys - SI SRI - 17:th-Jan-2015 Cheers guys. Im looking at them tomorrow so will get the PCD then. Cheers guys. |