+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Retrofit Research (https://vxoc.org.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Auto-reverse mirror positions (/showthread.php?tid=4318)
Auto-reverse mirror positions - umognog - 20:th-Mar-2019
Hi all,
I'm looking at if/how to add in auto-adjustment to the side mirrors whenever the vehicle is put in reverse to point further towards the ground (well, any user preset position recorded.)
Does anyone know the types of motor used in the mirrors already? Need to figure out if I need to add input sensors, or if the motor is a step-control and I can read the step info instead?
Sent from my SM-N950F using Tapatalk
RE: Auto-reverse mirror positions - Rusty2009 - 20:th-Mar-2019
There have a been few people do the modules for them the one brought is massive (I would say a prototype) I tested it but never fully fitted it.
I know it doesn't answer your question tho.
RE: Auto-reverse mirror positions - zaapp - 30:th-May-2019
@umognog, easiest way to fit this feature is retrofit Insignia's seats with memory. They have options to auto-adjust mirrors to driver (1 of 2 position) or last position assigned to your key.
Yeah it is possible to do that
.Look at attached photo.
1 - auto-adjust (move down) mirror when reverse gear put in.
2 - fold mirrors by remote control
At the moment i have Insignia's seats fitted into my car. I am working at retrofit Insignia's mirror motors in Astra's rearview mirrors. They are compatible but I need to add 4 wires to mirror positioning circuit.
Link with mirror wiring diagrams: https://cardiagn.com/mirrors-insignia-13-17/