+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Astra-J/GTC (https://vxoc.org.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Induction/MAF Holder (/showthread.php?tid=3240)
Induction/MAF Holder - Pwizzle93 - 14:th-Apr-2017
Hi!
I was wondering if anyone knows of any cheap induction kits or if not anywhere i could get a MAF Holder/Spacer so i can buy just a cone filter for my GTC VXR?
Look forward to your replies!
Thanks
Will
RE: Induction/MAF Holder - Shorty S91 - 16:th-Apr-2017
Hi mate, unfortunately this is a bit of a nightmare subject. If you are after a MAF sensor housing on its own you're pretty much looking to get one custom made. Making your own kit is easily the cheapest way to do it but I would set aside a budget of between £150 - £250 particularly if its for a VXR. The biggest cost for it will be a MAF housing and also a decent cone can set you back upwards of £40.
update:
I had a quick look on regal they have a kit for £289.
http://www.regalautosport.com/shop/RSS_Cold_Air_Intake_for_Astra_J_VXR_OPC.html
RE: Induction/MAF Holder - Eddie0892 - 17:th-Jun-2017
(16:th-Apr-2017, 19:46:50)Shorty S91 Wrote: Hi mate, unfortunately this is a bit of a nightmare subject. If you are after a MAF sensor housing on its own you're pretty much looking to get one custom made. Making your own kit is easily the cheapest way to do it but I would set aside a budget of between £150 - £250 particularly if its for a VXR. The biggest cost for it will be a MAF housing and also a decent cone can set you back upwards of £40.
update:
I had a quick look on regal they have a kit for £289.
http://www.regalautosport.com/shop/RSS_Cold_Air_Intake_for_Astra_J_VXR_OPC.html
I know this might be a silly thing to ask but why not just get one of the maf sensor holders from a J that has it seperate to the box then fit the cone filter. Are the maf sensor sizes different to the ones that are part of the box.