Mirror Covers - Printable Version

Mirror Covers - Printable Version

+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Retrofit Research (https://vxoc.org.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Mirror Covers (/showthread.php?tid=252)

Mirror Covers - Rusty2009 - 27:th-Mar-2014

Well I'm getting there just waiting for the tiger seal to go off.

[Image: DSC_0119_zps9d8b03a9.jpg]

Mirror Covers - tucpal - 27:th-Mar-2014

That looks very interesting i like it alot.

i feel a good how to cumming on.

Mirror Covers - Rusty2009 - 27:th-Mar-2014

A how to will be quite hard as Baz cut the covers I just had to finish off the end where it curved also getting the right indicators is going to be hard as I got some from the same the chap that Baz said were right but they have changed slightly.

Mirror Covers - tucpal - 27:th-Mar-2014

you don't fancy selling them then Lol

Mirror Covers - Lewis6317 - 27:th-Mar-2014

lol.... rusty has been waiting for these for months if he did sell them would be pricey lol

Mirror Covers - tucpal - 27:th-Mar-2014

NOT AS LONG AS I HAVE WAITING FOR HIM TO DO THE HOW TO FOR THE DRAW UNDER THE DRIVER SEAT Couch

Mirror Covers - Lewis6317 - 27:th-Mar-2014

lol omg i want that too Rusty get on it mate.... wait hang on, add to the list mate lol Smile

Mirror Covers - Rusty2009 - 27:th-Mar-2014

If I get you the part number you can get the bits and then I can do the howto without having to drill my rivets out. Couch

its about Â£110 for all the parts and I'll fit it free and ill chuck in the rivets.

Mirror Covers - Lewis6317 - 27:th-Mar-2014

ok mate thank i will keep in mind soons i get cash coming in again... so we will stick to current list Smile

rattle, footwell lights, finishing fogs Smile

was that all? cant remember....

Mirror Covers - Rusty2009 - 28:th-Mar-2014

tucpal Wrote:NOT AS LONG AS I HAVE WAITING FOR HIM TO DO THE HOW TO FOR THE DRAW UNDER THE DRIVER SEAT

Longer

since October (NO NEED TO SHOUT AT ME) Rofl

Anyway my plan for today was to fit the mirrors and do the howto for the puddle lights & yes also the draw.

That got chucked out the window as I had to cut away a lot of the mirror inside.

After doing that I wasn't happy with having the Circuit board in the mirror housing so I set about changing the way it was done,

Here's today results

[Image: DSC_0122_zps76c0386c.jpg]

Both mirrors are done and ready to fit but unless I can get the wife out over the weekend it will be next week now.

Mirror Covers - Lewis6317 - 28:th-Mar-2014

:-) looking very nice mate :-) whats puddle lights?

Sent from my iPhone using Tapatalk

Mirror Covers - tucpal - 28:th-Mar-2014

rusty they look very good and i am very jellos so well done top job, Smile

Mirror Covers - Rusty2009 - 28:th-Mar-2014

Thanks chaps.

Lewis, puddle lights are what I fitted to the bottom of my doors think it was on your list.

Mirror Covers - Lewis6317 - 29:th-Mar-2014

Oh right ok mate i will look at getting the lights think they are on my watching page :-)

Sent from my iPhone using Tapatalk

Mirror Covers - Rusty2009 - 29:th-Mar-2014

Right Got rid of the wife for a couple of hours so off to fit and get the Puddle light how to done

I've drilled some holes in the mirror so the water drains as it holds water and there is no way of it draining

[Image: DSC_0124_zps026811f5.jpg]

Mirror Covers - Rusty2009 - 29:th-Mar-2014

Done took awhile as I did some other bits.

[video=youtube;4Wktos9XFl4]https://www.youtube.com/watch?v=4Wktos9XFl4&feature=youtu.be[/video]

Mirror Covers - Lewis6317 - 30:th-Mar-2014

looks so good mate Smile

Mirror Covers - Rusty2009 - 30:th-Mar-2014

The wife says it now has flashing ears lol.

Mirror Covers - Lewis6317 - 30:th-Mar-2014

hahaha... I am saving the pennies for you old folding ones, Still having trouble getting the door card switch of ebay :(

Mirror Covers - tucpal - 30:th-Mar-2014

very good i like them alot Clap

Mirror Covers - tucpal - 30:th-Mar-2014

good job.