+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Request for information (https://vxoc.org.uk/forum/forumdisplay.php?fid=24)
+--- Thread: Parking Sensors (/showthread.php?tid=2063)
Parking Sensors - AlexFitton - 22:nd-Jan-2016
Is the parking sensors from an astra estate the same as the hatchback?
Whats the best way to spray them? Is there a company that does it.
Sent from my iPhone using Tapatalk
RE: Parking Sensors - tucpal - 22:nd-Jan-2016
There the same
RE: Parking Sensors - AlexFitton - 22:nd-Jan-2016
(22:nd-Jan-2016, 15:34:34)tucpal Wrote: There the same
Cool, Thank you.
RE: Parking Sensors - AlexFitton - 22:nd-Mar-2016
I have bought these parking sensors for my retro fit.
http://www.ebay.co.uk/itm/391264040971?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Do i need a bracket to fit them to my car as they appear to be the flush mounted ones. Also how would i go about spray painting them?
Thanks
I found the answer but i cant seem to find where to buy them from. I cannot see them on autovaux.
20 14 54 005 BRACKET, SENSOR, REAR, RH, OUTER 0
20 14 54 007 BRACKET, SENSOR, REAR, RH, INNER 0
20 14 54 004 BRACKET, SENSOR, REAR, LH, OUTER 0
20 14 54 006 BRACKET, SENSOR, REAR, LH, INNER 0
RE: Parking Sensors - tucpal - 22:nd-Mar-2016
yep you need brackets try autovaux
Parking Sensors - AlexFitton - 22:nd-Mar-2016
(22:nd-Mar-2016, 20:07:42)tucpal Wrote: yep you need brackets try autovaux
I tried that autovaux part number and searching the site but i found nothing.
Il either have to phone them up or i will just keep looking for a different part number and searching again.
Sent from my iPhone using Tapatalk
(22:nd-Mar-2016, 20:07:42)tucpal Wrote: yep you need brackets try autovaux
You wouldnt happen to know what the bolt was for the steering wheel either would you?
Sent from my iPhone using Tapatalk
RE: Parking Sensors - tucpal - 22:nd-Mar-2016
rusty may help you
RE: Parking Sensors - Rusty2009 - 23:rd-Mar-2016
(22:nd-Mar-2016, 16:05:12)AlexFitton Wrote: I found the answer but i cant seem to find where to buy them from. I cannot see them on autovaux.
20 14 54 005 BRACKET, SENSOR, REAR, RH, OUTER 0
20 14 54 007 BRACKET, SENSOR, REAR, RH, INNER 0
20 14 54 004 BRACKET, SENSOR, REAR, LH, OUTER 0
20 14 54 006 BRACKET, SENSOR, REAR, LH, INNER 0
Put them part numbers in online, you will be best of getting a body shop to drill the holes and bond them on.
Unlike the kit Tucpal linked you to those brackets are what they would use at time of manufacturing the bumper whereas the one's in the kit are designed to clip together.
RE: Parking Sensors - AlexFitton - 23:rd-Mar-2016
(23:rd-Mar-2016, 08:29:19)Rusty2009 Wrote:(22:nd-Mar-2016, 16:05:12)AlexFitton Wrote: I found the answer but i cant seem to find where to buy them from. I cannot see them on autovaux.
20 14 54 005 BRACKET, SENSOR, REAR, RH, OUTER 0
20 14 54 007 BRACKET, SENSOR, REAR, RH, INNER 0
20 14 54 004 BRACKET, SENSOR, REAR, LH, OUTER 0
20 14 54 006 BRACKET, SENSOR, REAR, LH, INNER 0
Put them part numbers in online, you will be best of getting a body shop to drill the holes and bond them on.
Unlike the kit Tucpal linked you to those brackets are what they would use at time of manufacturing the bumper whereas the one's in the kit are designed to clip together.
I have emailed autovaux to see if they can help me.
I cannot find the brackets anywhere on the internet.
Parking Sensors - AlexFitton - 23:rd-Mar-2016
Spoke to autovaux these should he the correct part numbers however they dont have them on the site so fingers crossed the correct ones.
12777468 BRACKET, SENSOR, REAR, RH, OUTER 0
13294648 BRACKET, SENSOR, REAR, RH, INNER 0
12777466 BRACKET, SENSOR, REAR, LH, OUTER 0
12777467 BRACKET, SENSOR, REAR, LH, INNER 0
Sent from my iPhone using Tapatalk
RE: Parking Sensors - THEHITMAN - 27:th-Apr-2016
How do you connect to the sensors?
Don't you need the factory wiring loom with plugs?
Parking Sensors - Rusty2009 - 27:th-Apr-2016
(27:th-Apr-2016, 09:03:07)THEHITMAN Wrote: How do you connect to the sensors?
Don't you need the factory wiring loom with plugs?
Yes factory loom or if you can find all the connectors and pins you could make your own loom/s
Sent from my iPhone using Tapatalk