any where i can get a set of keys new and programed info needed
i am fed up with this key rattle now i need new ones as the spare is also broke
rusty do you think you can program a key to the car ??
found this but don't fancy the drive for a programed one
http://www.ebay.co.uk/itm/New-Vauxhall-O...27e7e57300
anyone know how much programing will be and will it be a visit too vauxhall programming and a key from them needed ??
I had a second flip key from Vauxhall and apparently only they can programme it. You can get third parties that do it from what I've seen but you need specialist software.
I do know you can only have three keys programmed to each car.
I got my key off eBay £35 uncut then I got it cut and programmed it myself.
anyone with a vauxcom or MDI can programme it mate need the car pass.
I know on my veccy I programmed 5 keys I've only got 3 so far on the J.
you going to trax then
thanks for the link dicko where are you from then does your mate want to offer discount tuning on here ??
I am in Northwich my mate is in barnton
Yes he probley will hes is very good
cool we could do with a mapper on here
tucpal Wrote:you going to trax then
I'm hoping too but not looking possible at the minute mate
tucpal Wrote:cool we could do with a mapper on here
+1 I'm thinking of having my DFP out and remap soon.
The rattle is annoying mine has it to. I'm tempted to strip my key down and try to fix it myself I've just not got around to making a start on it.
Thats why my other key is broke the flip key stop working so i opened the key to fix it
and there is no way it goes back together
i got a cheap case from ebay and the thing will not hold the blade as it is a different fitting for the blade
and also when i opened the cheap case to swap the blade and circuit board over again the key would just not go together
so i glued it and broke the circuit as glue got all over it and now the key case will not go together and the key fob wont work either
so i messed up big time there
best bet looks to just get a key with the chip and circuit in there and just get the blade cut and programed
I know there not many places that can cut the blades as the cutting tool is very small I couldn't find anywhere local but gave it to my mechanic who knew someone and it only cost a beer too
This is the chap who I got the key off his price has gone up though.
http://www.ebay.co.uk/itm/New-Vauxhall-O...27e7e57300
think i will just go up to him and get two cut and programmed from him
Rusty2009 Wrote:I'm hoping too but not looking possible at the minute mate
+1 I'm thinking of having my DFP out and remap soon.
He can do that very soon i want mine doing to