I want to retrofit Side Blind Spot assist in my GTC.
I know i'll need 2 more side sensors and monuts.
Possibly a new module.
and i think i'll DIY the mirror LEDs.
is there anything else i'll need and is it possible to program?
I did look into fitting it myself but the cost of the mirror glass alone made me walk away.
I'll dig all the bits out and double check what's needed.
But it's like any retrofit until it's done and proven to be done no-one will be able to say yes or no it's a gamble you taking doing it & trust me I've retrofitted almost everything to my car.
There are people out there will just say no it can't be done.
(25:th-Apr-2019, 14:48:36)Rusty2009 Wrote: [ -> ]I did look into fitting it myself but the cost of the mirror glass alone made me walk away.
I'll dig all the bits out and double check what's needed.
But it's like any retrofit until it's done and proven to be done no-one will be able to say yes or no it's a gamble you taking doing it & trust me I've retrofitted almost everything to my car.
There are people out there will just say no it can't be done.
The mirror glass is far too expensive i did see a video on youtube with a Russian who did it using some LEDs in the little windows before the doors so something similar to that, maybe even a LED in the mirror housing.
Looks like ill need
Outer sensors P/N 13291381 X2
Mounting brackets. P/N 12777466 + 12777468
Control unit P/N 13418009
Just need to find out How to wire everything in or buy a loom.