Service done. Had to pay an 1/2hr labour for them to untwist a brake pipe after I had new brakes done a few months back.
Was told he couldn't get the locking nut off as the key was rounded.
I would have thought anyone with some sense would have called me and told me about this and offered to sell me a new wheel nut key but no. He managed to u twist it without removing the wheel anyway.
Parts dept was closed when I picked up the car so does anyone m ow how much vx charge and is it a new key or do I get 4 nuts aswell?
Sent from my iPhone using Tapatalk
all 4 mate best to look around for a set on ebay etc
I always thought you could get a new key if you have the code that's in the box.
Mind you if the key has been rounded off best to get a new set.
I always tell any garage NO AIR TOOLS on locking wheel nuts.
i had a few sets on the astra h as they were dreadful
a new set was offered every time
Just checked the wheel nuts are also rounded aswell. The key grips it but just won't "catch" thinking a new key might get the 2 off the front and I'll just put normal nuts back on
Sent from my iPhone using Tapatalk
I had to have an old nut weld to them on my zaffy.
Sent from my iPhone using Tapatalk
Vx want £39 for a new set of locking nuts and £30 for the original key so I can take off the broken ones.
Problem is, if I buy a new key it may not fit it properly because everything is worn.
Garage by me said £60 they will weld and remove them for me. Or another garage said they have a tool for removing them. Going to see them Monday and have a chat over cost etc....
After all this, proper nuts are going back on!!
Sent from my iPhone using Tapatalk
£60 to remove a nut Jesus that's well over priced hope you get it sorted
I'm having a ring around tomorrow, how much do you think should expect to pay?
Sent from my iPhone using Tapatalk
An hours labour would be more than fair price £30 max and that is about a 10 to 15 job max
I paid £60 to have nuts welded on all 4 wheels.
Had a look at whacking a socket onto it but the shape of the nut it won't work.
Sent from my iPhone using Tapatalk
(3:rd-Jul-2015, 18:26:16)tucpal Wrote: [ -> ]An hours labour would be more than fair price £30 max and that is about a 10 to 15 job max
Next your be saying to pay with peanuts, average labour here is £65 per hour and the dealers charge £120 per hour.
My vx dealer charged me £40 odd for half hour labour.
Sent from my iPhone using Tapatalk
you southerns get ripped wright off pay what you want £30 for 15 MINS work works up here.
So, nuts are off. My local tyre place tried with a tool but wouldn't work. Welding also wouldn't work only solutions was to smack the ***** out of them with a lump hammer and a flat headed screwdriver.
The nuts had a rotating sleeve to stop anything getting a good grip over it.
Mate of mine done the job. Few marks on the wheels but nothing too noticeable. Prob get them refurbed in the future
Sent from my iPhone using Tapatalk