VXOC Astra-J/GTC

How to remove air vent trim

[Image: 1.JPG]

So start by getting a trim in the bottom and then slide it across.

[Image: 2.JPG]

Now with a slight rocking of the trim tool the fascia will start to pop off work you way along the bottom then up the right side and stop by the top.

[Image: 4.JPG]

Move the trim tool to the left side and again using a rocking motion the fascia will pop off

[Image: 6.JPG]

On re fitting you must start at the top as you place it in there will be a slight gap, all you do is then push upwards and the top will click in then then do each side then the bottom.

[Image: 8.JPG]

excellent how to and well done. Thumbs

Thank you! AGAIN!!!

No problem Doublethumbs

good tut mate Smile

just be real careful they are brittle
but this is well worth doing if you are going for a color change on the trim.

[Image: wipers386_zps8c70bf99.jpg]

I cant get it off Smile

I tried with 3 different tools and always i get under the trim but then i go under the black plastic...
Any pointers?! Smile

Thanks!

Only real pointer is not to stick in too far and you need to have a slight angle.

Yeah not many tips to give! Just gotta use a thin tool and make sure you don't prise it too hard as I managed to break a bunch of clips when I did it [PENSIVE FACE]

Sent from my XT1092 using Tapatalk

Thanks,
tried again and managed - final tool Bacho knife Big grin

Hi guys I'm a newbie so please be patient I wanna carbon wrap all the chrome in my astra any help would go along way thanks

Rusty2009

tucpal

DNT

Rusty2009

Lewis6317

tucpal

milika

Rusty2009

sheppy1

milika

mikeb7900